Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Paccar Davie
#1
Any1 know if there is an activater for it, would be nice to have for sure, seeing as there are a lot of these moters on the road nowadays, if you don’t want to post publicly pms link will work, thanks
#2
Second this. In desperate need of Davie 4 or 5

Thanks
Frankie
[-] The following 1 user says Thank You to fazooley for this post:
  • cumapart
#3
Lucifer and alphacode both have a running copy that works without Internet. NEXIQ works too but it's having intermittent connection issues.
If I helped in any way, please give THANKS + REP!

Cummins INSITE 8.x+Fleet Cals, Password Resets
Cummins Calterm 5.1.1
Calterm Master Tool v7.3
Cummins INCAL Tool v5.5
CNH 9.2 Dealer or Engineering
Wabco 13.0 Engineering
DDDL 8.12 SP1 - Levels 10/10/10
CAT ET 2020B + FPKG + AutoGen
SR 4.8 Engineering
Bendix ACOM Pro 2020
Allison DOC 2019.3
Remote Tuning for all Cummins engines. PM for Quote.
[-] The following 4 users say Thank You to zyNoT for this post:
  • burrows_03, fazooley, Rocinante, technik9195
#4
(02-04-2019, 02:33 AM)zyNoT Wrote: Lucifer and alphacode both have a running copy that works without Internet. NEXIQ works too but it's having intermittent connection issues.


I've contacted both of them, hoping I hear back soon 

Frankie
#5
(02-04-2019, 02:33 AM)zyNoT Wrote: Lucifer and alphacode both have a running copy that works without Internet. NEXIQ works too but it's having intermittent connection issues.

R4 from alphacode NEXIQ is working.
#6
Anyone using Davie and nexiq. Up to 2016 you can use the nexiq itself just fine in most cases. Anything after that you may need a nexiq channel 3 to channel 1 adapter harness. It will not connect and ask for the user to manually put in the chassis number. Without the adapter harness. Just a share
[-] The following 1 user says Thank You to burrows_03 for this post:
  • webmaster
#7
yes i agree with barrows ,as far as i know the black 9pin is j1939 and the green 9 pin plug in the dash is OBD
#8
(02-10-2019, 06:18 PM)burrows_03 Wrote: Anyone using Davie and nexiq. Up to 2016 you can use the nexiq itself just fine in most cases. Anything after that you may need a nexiq channel 3 to channel 1 adapter harness. It will not connect and ask for the user to manually put in the chassis number. Without the adapter harness.  Just a share


//Disergard ..

Thanks
Frankie
#9
I am available as a tester, I have dealer access and work on them daily. We use a 9 pin converter harness from 16-17 to use with Nexiq2. 18-19 VECU models went back to regular pin out so no need for converter harness, use Nexiq2 as normal.
#10
Any one can share the paccar davie soft?
  


Forum Jump:


Users browsing this thread:
1 Guest(s)