12-16-2023, 08:43 PM
(12-16-2023, 11:49 AM)Number8 Wrote: Hello everyone!
I'm new here and hoping I'll be able to find the help I need or the answers.
I've got a 2013 ISX CM2250 that the previous owner had deleted the VGT turbo and it seems that the engine brake doesn't work as good as a truck with the VGT. Is there a way to tune the current setup to have a better engine brake and if not how complicated would it be to re install a VGT turbo as far as tuning goes?
No. The 3rd stage jake will not work without the VGT. You need to re-install the VGT and re-flash vehicle.
If I helped in any way, please give THANKS + REP!
Cummins INSITE 8.x+Fleet Cals, Password Resets
Cummins Calterm 5.14.0
Calterm Master Tool Ultimate v10.2
Cummins INCAL Tool v7.0
CNH 9.2 Dealer or Engineering
Wabco 13.6 Engineering
DDDL 8.19 SP1 - Levels 10/10/10
CAT ET 2024A + Perkins 2024A + FPKG/AutoGen
SR 4.11 Engineering
Bendix ACOM Pro 2024
Allison DOC 2024
JPRO 2024
Remote Tuning for all Cummins engines. PM for Quote.
Cummins INSITE 8.x+Fleet Cals, Password Resets
Cummins Calterm 5.14.0
Calterm Master Tool Ultimate v10.2
Cummins INCAL Tool v7.0
CNH 9.2 Dealer or Engineering
Wabco 13.6 Engineering
DDDL 8.19 SP1 - Levels 10/10/10
CAT ET 2024A + Perkins 2024A + FPKG/AutoGen
SR 4.11 Engineering
Bendix ACOM Pro 2024
Allison DOC 2024
JPRO 2024
Remote Tuning for all Cummins engines. PM for Quote.