+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles)
+--- Forum: Heavy Vehicle Tuning (https://www.zezauto.com/Forum-Heavy-Vehicle-Tuning)
+--- Thread: Aussie BDG CM2250 (/Thread-Aussie-BDG-CM2250)
Aussie BDG CM2250 - Isx-aus - 07-18-2021
Hi guys. i have a Aussie bdg cm2250 with aftertreat deleted. Aussie cm2250 does not have egr or dpf and no VGT turbo. I was wondering if anyone else on here has any experience with these engines? i done delete myself based on the mm2. Also just seeing what people use to calculate timing and fueling on these engines? im only learning trying to gain more experience.Thanks
RE: Aussie BDG CM2250 - wiegmanco - 07-20-2021
pm me i can help you out
RE: Aussie BDG CM2250 - easydiesel - 10-26-2022
EFILIVE flashscan for logging is a must...
Just change the throttle to torque table
then all the fuel tables (down low) say from 800rpm to 16500 rpm.. say by increase of 10-15% (1.15x)
Usually saves a gear or half a gear when shifting and a lot better fuel economy.
Then Opening and closing of the VGT is pretty important to..