ZEZ AUTO

CM2350B Central

Error when it reaches 100% recording with calterm IV

Incal DO90036.02

I've already tried for both cans and already enabled the parameter "C_J1939_GTISCompliant" in the calibration
[attachment=766]
any tips on where i'm going wrong?

From what i have understood you need efilive to unlock/disable dodges security bs first

(09-29-2021, 07:51 PM)IceXN Wrote: [ -> ]From what i have understood you need efilive to unlock/disable dodges security bs first

It can be done in Calterm, but yes the ECU must be in 'Unlocked' state first before you can do anything.

(09-29-2021, 07:51 PM)IceXN Wrote: [ -> ]From what i have understood you need efilive to unlock/disable dodges security bs first

What would unlock/disable be?

Calibration DO90037.01 writes 100% to the control unit via calterm IV.
Without crashing at 100%.

Calibration DO90036.02 hangs after 100%. I have to unlock by 5volt jumper.



Edit......

Calterm IV manages to "'Unlocked'" in "efilive"

personally ive never tried it, and I use Calterm 5.3