ZEZ AUTO

Just some FYI:

The red engine maker changed how incal files are packed. Insite 8.7 is needed to read them .. however there is a way around this if you have Insite 8.6 .

For those who want to update their 8.6 to be directly compatible with the newer incal files designed for 8.7 that can dnloaded via quickserv, etc.. simply copy these 3 files out from the 8.7 version of insite into your existing 8.6 insite and overwrite the files that are there already ...

'CompressionUtilities.dll'
'CompressionUtilities.dll.manifest'
'CompressionUtilities.dll.tib'

... and your older copy of Insite 8.6 will now read them just fine.

=======

ALSO: Incal files from before this change can still be dnloaded off red engine makers wwwsite december2020 ... this is still compatable w older .. might be wise to dnload all the dvd's to have onhand from before the compatabiltiy change takes effect. How much longer it is avail for dnload is unknown but it likely will not be up for very much longer.

=======

UPDATE (01-24-202): This post used to say 8.5 and 8.6 ... some people say this trick does not work with 8.5 .. but for 8.6 it seems to work well. I know it worked for me.

anybody else try this, gave me an internal error and closed, I was smart enought to save previous files so was able to get it going again, but Im sure there are some that wont

(01-21-2021, 07:48 PM)tvindivo Wrote: [ -> ]anybody else try this, gave me an internal error and closed, I was smart enought to save previous files so was able to get it going again, but Im sure there are some that wont

I tried, but as in your case - Insite 8.5.0.57 DP- closed with an internal error

Thank you but Insite was crash when i do that Sad

Work like a charm for me , Windows 7 32 bits with Insite 8.6.0.116

(01-24-2021, 11:32 AM)DanyBoy Wrote: [ -> ]Work like a charm for me , Windows 7 32 bits with Insite 8.6.0.116

You are luck. I use Insite 8.5.2 ?

(01-24-2021, 06:09 PM)MartinLe Wrote: [ -> ]
(01-24-2021, 11:32 AM)DanyBoy Wrote: [ -> ]Work like a charm for me , Windows 7 32 bits with Insite 8.6.0.116

You are luck. I use Insite 8.5.2 ?

huh. Worked 4 me so I shared the info .. but i do also have 8.6 so I fixed the post above.

(01-20-2021, 10:15 AM)MaraJin Wrote: [ -> ]Just some FYI:

The red engine maker changed how incal files are packed. Insite 8.7 is needed to read them .. however there is a way around this if you have Insite 8.6 .

For those who want to update their 8.6 to be directly compatible with the newer incal files designed for 8.7 that can dnloaded via quickserv, etc.. simply copy these 3 files out from the 8.7 version of insite into your existing 8.6 insite and overwrite the files that are there already ...

'CompressionUtilities.dll'
'CompressionUtilities.dll.manifest'
'CompressionUtilities.dll.tib'

... and your older copy of Insite 8.6 will now read them just fine.

=======

ALSO: Incal files from before this change can still be dnloaded off red engine makers wwwsite december2020 ... this is still compatable w older .. might be wise to dnload all the dvd's to have onhand from before the compatabiltiy change takes effect. How much longer it is avail for dnload is unknown but it likely will not be up for very much longer.

=======

UPDATE (01-24-202): This post used to say 8.5 and 8.6 ... some people say this trick does not work with 8.5 .. but for 8.6 it seems to work well. I know it worked for me.

Yes, thank you so much mister, works great with 8.6.0.116!!!

MaraJin

tvindivo

Skyman

MartinLe

DanyBoy

MartinLe

MaraJin

Skyman